You are here: HomeProductsMetallized Capacitors in PCM 7.5 - 37.5 mmMKS 4-LN page 1

Overview   MKS 4   MKS4-LN   MKM 4   MKP 4   PDF-File

Page 2
Metallized Polyester (PET) Capacitors for Low Noise Applications in PCM 22.5 mm and 27.5 mm
Special Features High volume/capacitance ratio Self-healing Low noise emission due to special construction According to RoHS 2002/95/EC Typical Applications For applications in sound sensitive surroundings e.g. Audio/video equipment Communication and data processing systems Lighting Medical equipment Construction Dielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Vacuum-deposited Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire Marking: Colour: Red. Marking: Black. Epoxy resin seal: Red		Electrical Data Capacitance range: 0.33 µF to 15 µF (E12-values on request) Rated voltages: 250VDC, 400VDC, 630VDC Capacitance tolerances: ±20%, ±10%, ±5% Operating temperature range: -55°C to +100°C Test specifications: In accordance with IEC 60384-2 and EN 130400 Climatic test category: 55/100/56 in accordance with IEC Insulation resistance at +20°C: C = 0.33 µF: > 3 x 104 M (mean value: 1x105 M) C > 0.33 µF: >10000 sec (MxµF) (mean value: 40000 sec) Measuring voltage: 100 V/1 min. Dissipation factors at +20°C: tan Test voltage: 1.6 Ur, 2 sec Voltage derating: A voltage derating factor of 1.25% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages. Reliability: Operational life > 300000 hours Failure rate < 2 fit (0.5 x Ur and 40°C) Graphs: Soldering: at f C < 1.0 µF 1.0 µF< C < 15 µF 1 kHz 10 kHz < 8 x10-3 < 15 x10-3 < 10 x10-3 - Maximum pulse rise time: for pulses equal to the rated voltage Capacitance µF Pulse rise time V/µsec max.operation/test 250VDC 400VDC 630VDC 0.33...0.68 1.0...2.2 3.3...6.8 10...15 10/100 6/60 6/60 3/30 10/100 9/90 6/60 - 13/130 13/130 - -   Mechanical Tests   Packing Pull test on leads: d < 0.8 Ø: 10 N in direction of leads d > 0.8 Ø: 20 N in direction of leads according to IEC 60068-2-21 Vibration: 6 hours at 10...2000 Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29   Available taped and reeled up to and including case size 15x26x31.5 / PCM 27.5mm. Detailed taping information: Example for ordering / Part number:
Page 2