UL 94 V-0, metal
foil Terminations:
Tinned wire Marking:
Marking: Black on Silver.
For a transition period the capacitors will still
be marked "WIMA MP 30-Y2".
Electrical Data
Capacitance
range: 1000 pF to 0.1 µF
(E12-values on request)
Rated voltage:
250VAC Continuous DC voltage* (general guide): < 1250V
Capacitance tolerance: ±20%
Operating temperature range: -40°C to +110°C Climatic test category: 40/110/56/C in accordance with
IEC
Insulation resistance at +20°C: > 12 x 103 M
Measuring voltage: 100V/1 min. Dissipation factors:
tan< 13 x 10-3
at 1kHz and +20°C
Test specifications:
In accordance with DIN EN 60384-14 Approvals:
Maximum
pulse rise time:
Capacitance
pF/µF
Pulse rise
time V/µsec
max. operation
1000...2200
3300...0.015
0.022...0.1
2000
1500
500
for pulses equal to a voltage amplitude with x 250VAC = 355V according to IEC 60384-14 Test voltage: 3000VDC, 2sec Reliability: Operational life > 300000
hours
Failure rate < 1 fit (0.5 x Ur and
40°C) Graphs:
To minimize or avoid shock and/or
vibration stresses to terminating wires and
solder connections we recommend to fix voluminous
resin-potted MP capacitors as from e.g. PCM
22.5mm in an appropriate way since for
constructional reasons they do not sit tight on
the board.
Available taped and reeled up to and
including PCM 22.5mm
* If safety-approved EMI suppression capacitors are operated with a DC voltage being above the specified AC voltage rating the given approvals are no longer valid (DIN EN 60384-14).
Furthermore the permissible pulse rise time du/dt (Fmax.) will be subject to a reduction according to
Fmax. = Fr x x UAC / UDC
if the DC operating voltage UDC is higher than x UAC
Particularly
high reliability against 
active and passive
flammability
< 13 x 10-3 
x 250VAC = 355V according to IEC 60384-14
